Terms and Conditions

DM Air Conditioning: Terms and Conditions

TERMS AND CONDITIONS

1. LIMITED WARRANTY: DM Air Conditioning LLC (hereinafter referred to as DM) warrants that for one year from date of installation: all products and equipment will be free from defects in material and workmanship, except as noted on front of this document, subject to manufacturers warranties. Copies of warranties are provided upon installation of equipment. We warrant for a period of one year from the date of installation that labor furnished by DM will be free from defects. The warranty period will vary depending on the type of work performed and will be outlined in the estimate or contract provided to the customer. If there is no mention of warranty on the estimate or invoice, then the work is not covered by any labor or parts warranty. Warranty is non-transferable and does not cover work done by any company other than DM.

2. Under this limited warranty DM has the first option to repair equipment or provide replacement parts.

3. THE WARRANTIES AND LIABILITIES SET FORTH ABOVE ARE IN LIEU OF ALL OTHER WARRANTIES AND LIABILITIES EXPRESSED OR IMPLIED, IN LAW OR IN FACT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR USE.

4. Service: Service under these warranties will be provided by DM during normal business hours.
4a) Monday through Friday 8:00 am – 5:00 pm
4b) Saturday 8:00 am – 3:00 pm

5. Emergency service shall be considered hours outside those in section 4a and 4b and shall be charged at our prevailing rate. Nuisance calls such as No Problem Found, beyond the scope of this agreement, shall be charged at our normal service rate.

6. Warranty exclusions: The warranties do not include routine maintenance such as filter replacement, drain line cleaning, circuit breaker tripping, or replacement of fuses.

7. Reasonable precautions: During installation and repair of equipment we shall take all reasonable precautions to protect persons and property.
CUSTOMER SHALL TAKE ALL STEPS NECESSARY TO PROTECT VALUABLE OBJECTS OR REMOVE THEM FROM WORKING AREA.

8. DM WILL NOT BE HELD LIABLE FOR LOSS OR DAMAGE consequential or direct, arising from failure of equipment controls. DM is not responsible for water damage, framing, wall coverings or ceiling damage. In no case shall our liability exceed the cost of the work performed.

9. DM WILL NOT BE HELD LIABLE FOR LOSS OR DAMAGE relating to material or labor delays.

10. ALTERATION: Any alteration or deviation from the proposed specifications, such as, but not limited to, additional material and labor, involving extra charges, shall only be executed upon written orders and will become an additional charge over and above the charges on this contract. All agreements must be made in writing.

11. Deposits shall be considered non-refundable.

12. Upon delivery to a job site, it is the customers responsibility to maintain the security of all equipment.

13. Title to all equipment, parts, and gasses shall remain with DM until all sums due have been paid in full.

14. PAYMENT: Payment is due in full upon receipt of the invoice. Payment shall be considered received when all funds have been collected, either by cash, clearance of check, acceptance of credit card transaction or final payment from a lending institution after processing of a loan application. Returned checks, canceled credit transactions and rejection by the finance company of an application shall constitute default of payment and Title to goods shall remain with DM.

15. BILLING: DM may at its discretion extend credit to customers, upon the extension of such credit, all bills shall be due and payable within the limits set forth on the front of this document. The due date shall be computed from the date of completion of the work performed. A 1.5% late fee per month shall be added to all past due accounts.

16. COLLECT OF DEBT: If payment as set forth herein is not received when due, the customer will be liable for all expenses related to the collection of such sums, including reasonable attorneys fees and court costs.

17. RETURNED CHECKS: Checks which are returned to DM for reasons such as but not limited to: insufficient funds, stop-payment or closed account shall be liable to prosecution as allowed by law as well as fees allowed by law but not less than twenty dollars ($20).

18. In the event of non-payment of total amount due, customer agrees to allow DM or its assigns to enter onto the property and enter the domicile to retrieve equipment, parts or recovery of any gasses that may have been installed or used during installation. DM will not be responsible for replacement of items removed during the installation of parts or equipment in the case of non-payment.

19. DM will stop work if all payments are not received as due and will at our discretion remove equipment or parts that have been installed.

20. REFUNDS: Refunds shall be issued at the discretion of DM. In the event that a deposit was received any amounts due for work performed, but fee waived due to pending work, shall be paid from such deposit (ie: minor repairs until installation of new equipment). Refunds for payments received via check shall be processed such as to allow ample time for clearance of checks, stop payments will result in an additional fee as set forth by law. Credit card payments shall be credited to the original card in a timely fashion. Refunds for cash payments shall be issued by check in a timely fashion.

21. The air conditioning Seasonal Energy Efficiency Rating (SEER) ratio may fluctuate with the interchanging of components from various manufacturers designed so as to maintain a temperature of 78° F with an outside temperature of 91° F.

22. It is understood that this proposal/contract sets forth the entire agreement between the parties.

23. Governing Law. THIS AGREEMENT AND ANY SALES THERE UNDER SHALL BE GOVERNED BY THE LAWS OF THE STATE OF FLORIDA,WITHOUT REGARD TO CONFLICTS OF LAW RULES.

24. FORCE MAJEURE: DM shall not be held liable for any delays or non-performance due to circumstances beyond our control, including but not limited to acts of God, government actions, war, terrorism, natural disasters, or other unforeseeable events.

25. CUSTOMER ACCEPTANCE: By accepting DM Air Conditioning’s services, the customer agrees to be bound by these terms and conditions. If the customer has any questions or concerns, they are encouraged to contact DM Air Conditioning prior to accepting their services.DISPUTE RESOLUTION: Any dispute, claim, or controversy arising out of or relating to this agreement, the services performed, equipment installed, or any alleged defect, shall first be submitted to mediation in Broward County, Florida. If mediation is unsuccessful, the dispute shall be resolved by binding arbitration in Broward County, Florida, in accordance with the rules of the American Arbitration Association. Each party shall bear its own costs and attorney’s fees unless otherwise awarded by the arbitrator. The parties waive their right to a trial by jury.

26. PERMITTING, INSPECTIONS, AND DELAYS: DM Air Conditioning shall not be responsible for delays caused by permitting agencies, inspectors, utility companies, homeowner associations, manufacturers, material shortages, labor shortages, shipping delays, weather conditions, acts of God, or any other circumstances beyond DM’s reasonable control. Any estimated completion dates are approximate and are not guaranteed.

27. MOLD AND INDOOR AIR QUALITY DISCLAIMER: DM Air Conditioning is not a mold assessment, mold remediation, environmental testing, or indoor environmental quality company. DM makes no representations, warranties, or guarantees regarding the existence, prevention, treatment, removal, or remediation of mold, mildew, bacteria, viruses, allergens, or other biological contaminants. Any recommendations made regarding indoor air quality products are intended solely to assist in improving indoor air quality and are not a guarantee against mold growth or other environmental conditions.

28. ACCESS AND COSMETIC REPAIRS: Customer acknowledges that installation, service, repair, replacement, or inspection of HVAC equipment may require access through attics, ceilings, walls, roofs, flooring, landscaping, or other portions of the property. Unless specifically included in writing, DM shall not be responsible for cosmetic repairs, including but not limited to drywall, paint, texture, roofing materials, flooring, stucco, landscaping, or other finish work required to gain access to HVAC equipment or duct systems.

29. WATER DAMAGE AND DRAINAGE SYSTEMS: DM shall not be liable for water damage, mold growth, property damage, loss of use, or other consequential damages resulting from clogged drain lines, condensate pump failures, float switch failures, drain line restrictions, drain line leaks, power outages, customer neglect, customer refusal of recommended repairs, or any condition outside DM’s control. Customers are responsible for maintaining condensate drainage systems and promptly addressing any signs of water leakage.

30. EQUIPMENT PERFORMANCE AND SYSTEM CONDITIONS: Customer acknowledges that HVAC system performance is affected by factors beyond DM’s control, including but not limited to duct design, duct leakage, insulation levels, building construction, window efficiency, occupancy levels, thermostat settings, weather conditions, equipment maintenance, and other site-specific conditions. DM does not guarantee specific utility savings, humidity levels, temperature differences, or equipment performance unless expressly stated in writing.

31. FINANCING AND THIRD-PARTY PAYMENT PROGRAMS: In the event financing or payment through a third-party lender, credit provider, or financing company is denied, rescinded, reversed, charged back, canceled, or otherwise unavailable for any reason, Customer shall remain fully responsible for payment of all amounts due under this agreement. Customer’s obligations under this agreement shall survive any denial, cancellation, or termination of financing.

Subscribe and get 10% off your next service!

10% Off

DISCOVER THE DM DIFFERENCE